Ground Source Heat Pumps
Get the most out of the underground energy of your home thanks to our Classic Clausius ground source heat pump, specially designed to be combined with ACS tanks of any capacity, according to your needs. Include the option of models with active and passive cooling system to offer an optimal comfort experience throughout the year.
Domestic Range
The domestic range has been designed to provide maximum efficiency with the least environmental impact. The use of cutting-edge technology makes the difference in the design of these ground source heat pumps, eco-friendly and easy to install. Find out its two configurations: Clausius Classic and Clausius Elite, adaptable to your needs
High Power Range
Maximum capacity and efficiency with the lowest enviromental impact. Our range of High Power offer the highest power range on the market with Clausius Strong and Clausius Strong Double, designed to optimize its performance in all types of large-scale buildings. In both categories, the possibility of including an additional desuperheater for the production of high temperature DHW is offered. Discover the technological advances present in this type of equipment.
High Temperature Range
Our range of high temperature heat pumps are specially designed for the capture and production of high temperature heat and allow to extend the range of use of traditional heat pumps. Discover all the new applications in which all the advantages of heat pump technology can be obtained, such as its use with high-temperature capture, the recovery of residual heat or its use in cascade with traditional pumps.
High Power Range
CLAUSIUS aerothermal allows an aerothermal capture but with geothermal heat pumps, which gives rise to simpler and more reliable systems. CLAUSIUS hybrid systems allow the best of geothermal and aerothermal to be obtained in a single system and are, without a doubt, the future of air conditioning systems.
10 Benefits of the heat pumps powered by renewables:
1. Reduced Carbon Emissions:
ERV and HRV systems provide a continuous supply of fresh outdoor air while expelling stale indoor air. This helps maintain a healthier indoor environment by reducing the concentration of pollutants, odors, and contaminants.
2. Energy Efficiency:
Heat pumps are inherently efficient because they move heat rather than generate it through combustion. When combined with renewable energy, their efficiency is further enhanced, as the energy input comes from sources with high energy conversion efficiency.
3. Lower Operating Costs:
Renewable energy sources like solar, wind, and geothermal are typically free or have low operating costs. Heat pumps that use these sources can significantly lower energy bills, making them cost-effective over the system's lifespan.
4. Energy Independence:
Generating your own renewable energy allows you to become less reliant on external energy sources and utility providers. This enhances your energy security and reduces vulnerability to energy price fluctuations.
5. Long-Term Sustainability:
As renewable energy sources are replenished naturally, they ensure a long-term and sustainable energy supply for heat pumps.
6. Improved Air Quality:
Since heat pumps don't burn fossil fuels on-site, they don't release pollutants and harmful emissions into the air, leading to improved indoor and outdoor air quality.
7. Incentives and Rebates:
Many governments and utilities offer incentives, tax credits, and rebates to encourage the adoption of renewable energy systems, which can help offset the initial installation costs.
8. Enhanced Property Value:
Homes and buildings equipped with renewable energy-powered heat pump systems often have higher property values due to their energy efficiency and reduced operating costs.
9. Mitigated Energy Price Volatility
Renewable energy sources are less susceptible to market price fluctuations compared to fossil fuels, providing greater stability in energy costs.
10. Community Engagement:
Adopting renewable energy systems can contribute to community engagement, as it demonstrates your commitment to environmental sustainability and encourages others to consider similar options.
How heat pumps work with various renewable energy sources?
Heat pumps can be powered by renewable energy sources such as solar, wind, and geothermal energy to provide efficient heating and cooling. When renewable energy is used to operate heat pumps, the overall system becomes more environmentally friendly and sustainable.
1. Solar-Powered Heat Pumps:
- Solar energy is captured using photovoltaic (PV) panels, which convert sunlight into electricity.
- This electricity is used to power the heat pump's compressor and other components.
- The heat pump uses the electricity to drive the refrigeration cycle, transferring heat from a low-temperature area (e.g., outdoor air or ground) to a high-temperature area (indoors or hot water storage).
3. Wind-Powered Heat Pumps:
- Wind turbines generate electricity from the kinetic energy of the wind.
- The generated electricity is used to operate the heat pump, following the same process as solar energy process. The heat pump transfers heat as needed, either for space heating or cooling and domestic hot water.
5. Geothermal-Powered Heat Pumps:
- Geothermal energy is derived from the Earth's natural heat, available underground.
- A ground source heat pump (GSHP) is used to extract heat from the ground and transfer it to a building.
- GSHPs can work in both heating and cooling modes by exchanging heat with the ground through a loop system.
- Renewable electricity may still be required to power the heat pump's compressor and other components, enhancing the overall efficiency of the system.
9 STEPS to installing a Heat Pump System with Renewables Energy Source
- Determine the heat pump type: air-to-air, air-to-water, ground source, etc., based on your heating and cooling needs.
- Evaluate the location for installation, considering factors like available space, climate, and access to renewable energy sources (if applicable).
- Check if any permits or approvals are required for installation in your area.
- Calculate the heat load of your building to determine the appropriate heat pump capacity.
- Design the distribution system for heating and cooling (ductwork, piping, radiators, etc.).
- Plan the integration of renewable energy sources such as solar panels or wind turbines.
- If installing solar panels, determine the suitable location and orientation for optimal sunlight exposure.
- Install solar panels or wind turbines according to manufacturer guidelines and local regulations.
- Connect the renewable energy system to the electrical grid or storage system.
- Purchase the heat pump unit along with necessary components like air handlers, coils, expansion valves, etc.
- For ground source systems, plan and install the ground loop or boreholes if applicable.
- Install any required electrical wiring or circuits for the heat pump and renewable energy system.
- Ensure the installation site is ready and clean for efficient installation.
- Install the indoor unit, connecting it to the distribution system (ductwork, radiators, etc.).
- Ensure proper insulation and sealing to prevent energy loss.
- Position the outdoor unit on a stable surface with sufficient clearances for airflow.
- Connect refrigerant lines between the indoor and outdoor units.
- Charge the system with refrigerant as per manufacturer specifications.
- Check for refrigerant leaks and proper pressure levels.
- Connect the heat pump and renewable energy system to the electrical grid or storage system.
- Ensure proper grounding and compliance with safety codes.
- Install and configure the thermostat or control system to operate the heat pump and renewable energy sources efficiently.
- Integrate the renewable energy system with the heat pump controls.
- Test the heat pump system in both heating and cooling modes.
- Verify the operation of the renewable energy system and its integration with the heat pump.
- Check for leaks, system pressures, and temperature differentials.
- Provide training to the building owner or user on how to operate and maintain the heat pump and renewable energy system.
- Explain troubleshooting and maintenance tasks specific to the integrated system.
- Establish a maintenance schedule to ensure the ongoing efficiency and performance of the heat pump and renewable energy system.
Thanks for your email! Please check your email for further instructions. Regards, Hercuglas Renewables Team.